One platform, from the site edge to the cloud

NeoTAQ is the only vendor covering all three sectors (energy + telecom + industrial) with its own hardware AND software across Asia, GCC and Africa.

Request a Demo WhatsApp Us

100 MW+solar capacity already monitored on neoSphere

Manufacturing Oil & Gas Energy Water Telecom neoCore neoSphere
  • NeoTAQ is the only platform in the region that pairs its own edge hardware with cloud software — one vendor owns the full stack from the asset to the dashboard.
  • The same software stack across energy, telecom and industrial sites. One login, one team, one contract.
  • NeoTAQ doesn't just monitor — it controls. neoSync manages hybrid solar diesel, neoES dispatches BESS, neoEV manages charging. All from one platform.

It speaks what your assets speak

Vendor-neutral across mixed-brand inverters, gensets, meters and controllers.

  • OPC-UA
  • Modbus TCP
  • Modbus RTU
  • MQTT
  • BACnet/IP
  • DNP3
  • EtherNet/IP
  • REST API
  • OCPP

The system

One continuous system, from the site edge to the cloud

The reading leaves the asset, is captured at the edge, stays usable on site when the link drops, and lands in the cloud. One continuous path, always in sync.

  1. Your assets

    PV, BESS, gensets, grid, meters — and the PLC, HMI and SCADA already on site.

  2. The site edge

    Reads every asset where it runs, whatever the brand or protocol. Offline-first.

  3. On site monitoring

    The operator sees and runs the site from the floor, with or without a link.

  4. The neoSphere cloud

    Every site in one view. Fleet analytics, remote control and AI insight, anywhere.

The hardware that reads every asset

Rugged edge devices that sit on top of the equipment you already run. No rip-and-replace, and nothing stops when the link drops.

neoCore edge device

neoCore

Industrial edge hardware

The standard onsite foundation of the NeoTAQ platform. Connects to every asset on site and runs the full NeoTAQ software suite. From data logging to full energy management and remote control.

  • Connects to solar, storage, gensets, grid and industrial sensors
  • Runs the full NeoTAQ software suite on one device
  • Add capability through software updates, no hardware swap needed
  • Suitable for standard sites with a single or small asset count
Reads via OPC-UAModbus TCPModbus RTUMQTTBACnet/IPDNP3EtherNet/IPREST APIOCPP
Serves Energy Telecom Industry
Explore neoCore
neoCube edge device

neoCube

High performance edge hardware

The same connectivity and software as neoCore, with a dedicated onboard neural processing unit, more serial and analogue/digital I/O, and built-in 4G and GPS. Built for complex sites and for running edge AI directly on the hardware.

  • All protocols supported by neoCore: OPC-UA, Modbus, MQTT, OCPP and more
  • More serial, digital and analogue I/O: handles larger asset counts on a single device
  • Dedicated onboard NPU runs edge AI locally, no cloud dependency for inference
  • Built-in 4G and GPS to manage remote and distributed sites from one unit
  • Built for large sites, installations with many assets and demanding environments
Reads via OPC-UAModbus TCPModbus RTUMQTTBACnet/IPDNP3EtherNet/IPREST APIOCPP
Serves Energy Telecom Industry
Explore neoCube
neoDisplay edge device

neoDisplay

Edge hardware with integrated display

The same hardware, software and protocol support as neoCore, with a 15.6" touchscreen built directly into the unit. Teams read live site status and key metrics right at the asset. No laptop. No login.

  • All protocols supported by neoCore: identical connectivity
  • 15.6" integrated touchscreen shows live status and metrics at the asset
  • Runs the same NeoTAQ software suite as neoCore and neoCube
  • No separate screen, no laptop, no network login required on site
  • Part of the same NeoTAQ platform: same neoSphere cloud connection
Reads via OPC-UAModbus TCPModbus RTUMQTTBACnet/IPDNP3EtherNet/IPREST APIOCPP
Serves Energy Telecom Industry
Explore neoDisplay

The software that rides the signal

One logger feeds everything. On top of it sit the control applications that keep a site inside its limits.

neoLog

Universal datalogger

Collects and centralises data from every device on a site into one reliable stream the rest of the NeoTAQ platform can use.

  • Pull live data from every source on a site
  • Centralise readings from all your assets in one place
  • Feed on-site insight and the neoSphere cloud
  • Turn scattered data into one dependable stream
Serves Energy Telecom Industry
Explore neoLog

Control applications

  • neoSync

    PV, grid and genset control

    Coordinates solar, gensets and the grid so they run as one, making the most of solar while keeping generators in their efficient range.

    Serves Energy Industry
    Explore neoSync

  • neoES

    PV, grid, genset, storage and VSG control

    An energy management layer that monitors, controls and optimises every source on a site (solar, storage, wind, grid and gensets) and moves between them without interruption.

    Serves Energy Industry
    Explore neoES

  • neoEV

    EV charging management

    Monitors and manages EV charging infrastructure across a site or fleet, tracking session energy, load balancing across charge points and giving operators live status and remote control of every charger.

    OCPP 1.6OCPP 2.0.1Modbus TCPREST API
    Serves Energy Industry
    Explore neoEV

neoSphere

The cloud platform every deployment runs on — Monitor, Operate and Intelligence, in three additive tiers.

Explore neoSphere

neoSCADA

An OPC-UA SCADA system for supervisory control: live single-line diagrams, alarms and historical data, without the constraints of the traditional automation pyramid.

Explore neoSCADA

See the platform against your own sites

Tell us what you run. We will show you the same edge-to-cloud path on the assets you already have.

Request a Demo WhatsApp Us

100 MW+solar capacity monitored